Flooring Contractor in Fishers, IN - Garage and Basement Floors Built on Sound Slabs
Lawrence Epoxy Floors and Concrete puts down epoxy, polyaspartic and polished concrete floors in Fishers homes and businesses, from attached garages and basements to shop and warehouse floors, starting with careful prep of the slab underneath.
- Licensed and insured.
- Free on-site estimates.
- Expect a reply within 1 business day.
Fishers garages, basements and shop floors we work on
Most of the floors I look at in Fishers are in subdivision homes. They're usually attached garages that have never had more than the builder's finish, or basements being turned into gyms, playrooms or storage.
We also get a steady run of calls from businesses here with shop, warehouse and showroom floors, the same mix we see in Carmel and Noblesville. That mix shapes the job, because a newer garage slab usually needs grinding more than repair, while a shop floor that's taken years of traffic often needs cracks filled and old coatings stripped before anything new goes on.
Flooring services we offer in Fishers
Epoxy Floor Coatings
For a Fishers garage, basement or workroom that needs a hard, cleanable surface, we grind the slab first so the epoxy grips the concrete instead of the dust.
Commercial & Industrial Epoxy Floor Coatings
Shops, warehouses and light-industrial spaces in Fishers get a heavier system built for forklifts, carts and spills, and we plan the work around your business hours.
Garage Floor Coatings
Fishers garages that double as workshops or gym space get a flake coating, colored chips set in the epoxy that hide dirt and mop clean.
Polyaspartic Floor Coatings
When you want the garage back fast, polyaspartic cures much quicker than epoxy, though it sets so fast that the slab prep has to be right the first time.
Metallic Epoxy Flooring
For a finished basement, a home gym or a showroom, metallic epoxy gives a swirled, glossy look that shows every flaw underneath, so we grind flat first.
Urethane Cement Flooring
Restaurant kitchens and food businesses in Fishers that hose down floors or see hot water get urethane cement, which handles heat and wet better than standard epoxy.
Polished Concrete Flooring
Newer Fishers slabs in offices, retail spaces and open basements can often be ground and polished as they are, giving a low-upkeep floor with nothing on top to peel.
Stained Concrete Flooring
Stain soaks into the concrete for a mottled, warm color, which suits Fishers basements and patios where you want character without a thick coating on top.
Terrazzo Flooring
For lobbies, offices and higher-end entries in Fishers, terrazzo sets chips of stone or glass in a binder that's ground smooth for heavy foot traffic.
Basement Flooring
Fishers basements turning into gyms or playrooms get a floor picked for that use after a moisture check, because a damp slab is what usually lifts a basement coating.
Concrete Grinding & Surface Preparation
Builder-smooth slabs and garages with old sealer need diamond grinding to open the surface, and it's the step I'd least want rushed on any Fishers floor.
Concrete Sealing
A clear sealer helps bare garage floors, patios and basement slabs in Fishers resist oil stains and dusting, for owners who don't want a full coating.
Concrete Resurfacing & Overlays
When an older Fishers slab is pitted, patched or worn but still solid underneath, an overlay puts a new surface on it without tearing it out.
Self-Leveling Concrete & Overlays
Fishers basements and commercial rooms with dips, humps or uneven patches get a self-leveling layer poured first, so the tile, plank or coating that follows sits flat.
Pool Deck Coatings & Resurfacing
Backyard pool decks in Fishers that have gone rough, stained or slick can be resurfaced with a textured coating that's easier on bare feet.
Concrete Floor Stripping & Removal
If your Fishers garage or shop has a peeling coating, glued-down flooring or old tile glue, we take it off down to clean concrete before anything new goes on.
Get a free on-site floor estimate in Fishers
Send the form and we'll get back to you within one business day to set a time. I come out, check the slab and write up what we'd do and why, free and with no pressure to book.
(317) 463-6468- Based in
- Lawrence, IN 46226
- Hours
- Mon–Fri: 8 AM–10 PM, Sat–Sun: 6 AM–9 PM
Working in Fishers: permits, registration and pricing
Permits and inspections in Fishers run through the city's Department of Planning & Zoning, so when a floor job needs one, we file it there, keep you posted on where it stands and start once it's cleared. If it's unclear whether yours needs one, I check with that office before we start. The city also requires contractors to be registered to work here, and we're licensed and insured, with satisfaction guaranteed on every job.
We're based in Lawrence, a short drive south, and do the same work up in Westfield and the cities around it. What moves the price and the schedule here is mostly the slab: how much grinding it needs, whether old sealer or a peeling coating has to come off, how many cracks need filling, what the moisture test shows and how big the floor is. The written estimate lays each of those out, so you know what you're paying for before you say yes.
Why Fishers garages and shop floors wear out
Attached garages in Fishers subdivisions take a lot, from hot tires and oil drips to bikes, mowers and whatever gets dragged across them, and bare concrete soaks up those stains and starts to dust at the surface. A coating seals that off, but on a newer slab the builder's smooth, hard finish or a cure-and-seal product gives it nothing to grab, so we grind that layer off before we coat.
Shop and warehouse floors take forklifts, pallet jacks and spills every day, and once a thin coating wears through, the concrete starts breaking down at the joints and traffic lanes. We repair those first and build the coating thicker where the traffic runs.
How a floor job runs when you call us in Fishers
Here's how a Fishers floor goes from your first call or request to the final walk-through, and you'll know the plan and the price before we start.
Call or send a request
Call (317) 463-6468 or send the form, and we'll get back to you to set a time for me to come out. You don't need anything ready, just a rough idea of how you use the space.
I come out and check
I look at the floor, check the concrete for moisture and old coatings, and talk through which system fits how you use the space. You then get a written estimate of what we'd do and why.
We file permits, then prep
If the job needs a permit, we file it with the city and the start date waits on its review. Our own crew then grinds, repairs and cleans the slab, and I check the prep before anything goes on.
We install, then walk it
Our crew puts the floor down while I check the work along the way. When it's done, we walk the floor with you so you can see it before we pack up.
Questions about flooring work in Fishers
How much does an epoxy garage floor cost in Fishers, IN?
The cost of a Fishers garage floor is set mostly by the system you pick and how much work the slab needs before it's coated. A single-color epoxy usually runs less than a full flake system with a polyaspartic topcoat, and stripping an old peeling coating or repairing a lot of cracks adds time and material. I write up each part after looking at your floor, so you can see where the money goes.
What causes a garage floor coating to peel?
Most peeling garage coatings come down to the slab underneath, not the coating itself. A smooth builder finish or an old sealer gives the coating nothing to grip, moisture coming up through the concrete pushes it off from below, and hot tires can pull up a coat that never bonded well. That's why we grind the slab open and check it before anything goes on.
What is the best way to choose between epoxy and polyaspartic for a garage in Fishers?
For most Fishers garages I lean toward an epoxy base with a polyaspartic topcoat, because the epoxy builds thickness and the topcoat holds up better to sunlight through the door and to scratches. Straight polyaspartic gets you parked on it sooner, but it sets so fast that it leaves less room for error on a slab that isn't prepped right.
What insurance does a contractor need to register in Fishers?
To register with Fishers, a contractor has to show a certificate of insurance with at least $500,000 per occurrence for death or bodily injury and $100,000 per occurrence for property damage, or a combined single limit of at least $500,000 per occurrence. Registration isn't a city endorsement of anyone's work, and homeowners doing their own job are exempt. The city's contractor registration page has the current terms.
How do I find out if my Fishers home is in a flood zone?
The City of Fishers shows the FEMA flood hazard zones on its online GIS map, using data Hamilton County maintains, and that's the map the city has adopted for regulatory use. For a basement floor, how dry the slab tests matters more to us than the map, so we check moisture before choosing a system either way.
Can you put epoxy on a basement floor in Fishers?
Usually yes, once the slab tests dry enough for the system we'd put down. Basement slabs sit against the ground, so they can push moisture up even when the floor looks dry, and that's what lifts a coating. If yours is still too damp, I'd rather tell you no or point you to a system made for damp slabs than put down a floor that won't stay put.
Lawrence, IN
Get your Fishers floor looked at first
Most of what decides how long a coating lasts is already in your slab, so a look at it now tells you what you're working with before you pick a color.