Polyaspartic Floor Coatings in Lawrence, IN - a garage floor you get back fast
If your garage floor is peeling, stained or yellowing by the door, we grind it clean and lay down a coating that sets up fast.
- Licensed and insured.
- Free on-site estimates.
- Expect a reply within 1 business day.
Is a polyaspartic floor coating right for your garage?
Polyaspartic floor coatings are a fast-curing kind of polyurea that we put down over garage, basement and shop concrete in Lawrence, IN. They give you a hard-wearing floor that holds its color where the sun comes through the door, and they get you back in the garage much sooner than epoxy.
Most people who call me want two things, the garage back in use quickly and a floor that won't start peeling in a couple of years. Polyaspartic does both well when the concrete under it is ready, and that's where most of the job happens. The price moves with the size of the floor, how much old paint or coating has to come off, how many cracks need filling and which finish you pick. The schedule mostly turns on when you can empty the space and what I find when I check the slab for moisture. If you're still comparing systems, our garage floor coatings page covers the others. When I come out, I'll walk the floor and write up what we'd do and why, so you get your own number instead of a guess.
How can you tell your garage floor needs a new coating?
Coating lifting under the tires
If old paint or epoxy is peeling where your tires sit, the first coat usually never gripped the concrete, often because the prep was thin or moisture was coming up from below. The longer it goes, the more of it lets go, and all of it has to be ground off before a new floor goes down.
Yellowed finish near the door
A floor that's gone yellow or blotchy where the sun reaches it has a coating that doesn't hold up to sunlight. That color won't come back, and the patchy look tends to creep farther in over time.
Dusty, stained bare concrete
Uncoated concrete sheds a fine dust and soaks up oil and spills, so stains set deeper the longer the floor sits bare. Deep stains can mean more grinding to get down to clean concrete.
White powder or damp patches
A chalky white film or dark damp spots usually mean moisture is moving up through the slab. Coat over that without checking and the floor can push the coating off later, so this is one to have looked at before anything goes down.
How we put down polyaspartic floor coatings
This coating sets up fast and leaves no room to fix a mistake once it's mixed, so on our jobs the prep and the planning happen before the first batch. I check the slab for moisture first, because concrete can feel dry and still push a coating off later. Then our crew grinds the floor to take off old coatings and open up the surface so the coating can grip, fills cracks and chips, and vacuums it clean. We mix in batches sized to what the crew can spread while it's still workable, lay the base coat, broadcast flakes if you've picked them and roll on the clear topcoat.
Polyaspartic isn't the only floor I'd point you to. In some markets it comes in fewer colors and decorative looks than epoxy, so if you want a poured, swirled finish, metallic epoxy flooring is the better fit. For shop floors that take hot water, heavy washdowns or harsh chemicals, urethane cement flooring is usually the tougher choice.
Full flake broadcast
Vinyl flakes are spread over the wet base coat until it's fully covered, then sealed under the clear topcoat. It suits most garages because the mix of color and texture hides dust, tire marks and small flaws in the slab.
Partial flake
A lighter scatter of flakes over a solid base color gives a cleaner look with some speckle. It suits people who want a little pattern without the busier look of full coverage.
Solid color
One color with no flakes, base and topcoat. It suits basements and shops where you want a plain, bright floor that's easy to sweep, though it shows dust and scratches more than a flake floor does.
Get a written estimate for your polyaspartic floor
We reply within one business day to set up a free visit, with no pressure to book. I come out, check your slab for moisture and old coatings, and write up what we'd do and why.
(317) 463-6468- Based in
- Lawrence, IN 46226
- Hours
- Mon–Fri: 8 AM–10 PM, Sat–Sun: 6 AM–9 PM
What happens after you ask about a polyaspartic floor in Lawrence?
Here's how a job goes from your first call to the day you walk your new floor with me, so you know what's coming at each step.
Call or send a request
Call (317) 463-6468 or use the form, and we'll get back to you to set a time for me to come see the floor.
I check the floor in person
I look over the concrete, test it for moisture, check for old paint or coatings and ask how you use the space. That tells me which system fits, or whether the slab needs work first.
You get a written estimate
It spells out what we'd do, why we'd do it and what it costs, so you understand what you're paying for before you say yes. If the slab isn't ready for a coating, I'll tell you that plainly.
We prep, coat and walk it
Once you're ready, our crew preps the slab and puts the floor down. At the end we walk it together, and I tell you when it's ready for feet and when it's ready for the car.
Why Lawrence homeowners call us for polyaspartic floors
The owner writes your estimate
I come out to look at your floor and write the estimate myself, and our own crew does the prep and the install while I check the work along the way. The person who sized up your slab is the one making sure it's done the way it was written.
Prep-focused since 2017
I learned this trade running prep crews and sorting out floors that didn't hold, and we've been in business since 2017. Nearly every failed floor I've seen came back to the concrete underneath, so that's where we spend our time.
Licensed and insured for your job
Lawrence Epoxy Floors and Concrete is licensed and insured. Lawrence also has its own contractor rules apart from Indianapolis, which I lay out below so you know what to ask any installer.
Satisfaction guaranteed on every job
Satisfaction guaranteed on every job is the promise behind every floor we put down. It's also why I'd rather tell you a slab isn't ready than coat over a problem.
With a coating that sets this fast, the work that counts happens before it's mixed. Send us a request or call (317) 463-6468, and I'll come take a look at your floor.
Polyaspartic and concrete floor work in Lawrence, IN
Lawrence handles its own building permits and contractor rules, separate from Indianapolis. The city's Department of Public Works issues all building permits here, and city code requires one before building, altering or repairing a building or structure. I don't assume either way on a coating job, so when it's unclear I check with that office before we start, and when a job needs a permit we file for it and tell you where it stands. City code also says anyone who contracts to do construction work in Lawrence has to be a Registered Contractor, and Indianapolis's contractor licensing doesn't cover Lawrence, so that's the registration to ask any installer about here.
We're based in Lawrence and work across the cities around it. On jobs here and in Fishers and Carmel, we see plenty of attached garages with worn paint or old epoxy that has to come off first, and newer slabs that were never sealed and have soaked up years of oil, so either way we start at the concrete.
Questions about polyaspartic floors in Lawrence
How soon can I park on a new polyaspartic garage floor?
Usually within 24 hours, according to one garage cost guide, and you can walk on it in 4 to 6 hours. That same guide puts epoxy at 5 to 7 days before you can drive on it, and it describes polyaspartic as a same-day install. On the last day, I'll tell you when it's ready for your car.
How long does a polyaspartic floor last?
One cost guide gives polyaspartic a lifespan of 15 to 20 years. How close a floor gets to that depends a lot on the concrete under it and the prep before it goes down.
How much does a polyaspartic garage floor cost in Lawrence, IN?
I can't give you a fair number without seeing the floor, and one cost guide puts polyaspartic at the highest upfront cost of the common garage coatings. What you're weighing is that higher price against a floor meant to last many years and a much shorter wait to use your garage. Your written estimate lays out what we'd do and what it costs.
What causes a polyaspartic floor to peel or lift?
Most of the time it's the concrete underneath, either prep that didn't open up the surface or moisture coming up through the slab. One coating maker's guide calls for grinding or shot blasting, which roughens the surface with small steel shot, to strip old coatings and leave a clean, dry surface, and another maker's guide says most pros don't consider acid etching enough. A slab can also feel bone dry and still hold enough moisture to lift a coating within months, so ask any installer how they prep and whether they test for moisture.
Who issues building permits in Lawrence, Indiana?
The City of Lawrence Department of Public Works issues building permits in Lawrence. Applications go through the city's website or the permits window at the Lawrence Government Center, and when one of our floor jobs needs a permit, we handle the filing.
Is a polyaspartic floor slippery when wet?
It can be, because any floor coating may get slippery when wet, as one coating maker notes on its data sheet. Where you want more grip, a fine anti-slip grit called aggregate can be spread into the wet coating and rolled in, and I'll ask about that at the estimate.
Related floors to compare with polyaspartic
Metallic Epoxy Flooring
If you want a floor with depth and movement, like poured stone or swirled metal, this epoxy gives you far more looks than a flake coating does.
Urethane Cement Flooring
For a shop or workroom floor that sees hot water, heavy cleaning or spilled chemicals, this thicker cement-based system is usually the harder-wearing choice.
Service areas for polyaspartic floor coatings
Lawrence Epoxy Floors and Concrete is based in Lawrence, Indiana, and puts down polyaspartic floors across the cities around it, from Fishers to Greenfield. The 12 cities below have their own pages, and if you don't see yours, just ask.
Lawrence, IN
Get your polyaspartic floor estimate started
Call (317) 463-6468 or send the form with where the floor is, whether there's an old coating on it and when you can clear the space, so I can plan the visit around your slab.